Little Birdie Epoxy Art Resin Clear - 250ml & Hardener -125ml
- Category: Art and Craft material shop near me, Art and craft materials shop, Art craft online supplies free shipping, Discounted Products - LAUNCH15 ...
- Odour & fume free.
- Auto bubble release
- Self-levelling resin
- Non-yellowing
- Mixes well with Little Birdie Resin colour / pigments
- Long shelf life
- Water & stain resistant
- No pot life: 45 minutes
- Full internal cure: 48 hours
- Touch dry: 12 hours
- Cure to handle: 10 hours
- Overcoat time: after full curing
How to use art resin:
Mix Resin and Hardener in the ratio 2:1 by volume preferably in paper/silicone cup with a wooden stirrer.
Stir the mixture well for about 3 minutes. Let it sit for 1 minute for bubbles to release.
Place the base on a levelled surface & pour the resin over your work.
Bubbles if any, will start rising to the surface & will pop on their own. If not, use a hot air gun over the un-popped bubbles.
The Resin needs to sit in a dust-free space while it cures. Within 24 to 48 hours fully cured (Curing time depends on weather conditions)
If required, apply 2nd coat only after the resin is fully cured.
- Odour & fume free.
- Auto bubble release
- Self-levelling resin
- Non-yellowing
- Mixes well with Little Birdie Resin colour / pigments
- Long shelf life
- Water & stain resistant
- No pot life: 45 minutes
- Full internal cure: 48 hours
- Touch dry: 12 hours
- Cure to handle: 10 hours
- Overcoat time: after full curing
How to use art resin:
Mix Resin and Hardener in the ratio 2:1 by volume preferably in paper/silicone cup with a wooden stirrer.
Stir the mixture well for about 3 minutes. Let it sit for 1 minute for bubbles to release.
Place the base on a levelled surface & pour the resin over your work.
Bubbles if any, will start rising to the surface & will pop on their own. If not, use a hot air gun over the un-popped bubbles.
The Resin needs to sit in a dust-free space while it cures. Within 24 to 48 hours fully cured (Curing time depends on weather conditions)
If required, apply 2nd coat only after the resin is fully cured.
Related Products
