2:1 ART RESIN KIT - 300 GM
- Category: Art and Craft material shop near me, Art and craft materials shop, Art craft online supplies free shipping, Pourfect ...
2:1 Art Resin is a high performing epoxy resin system with supreme gloss, good pot life to make it easy for beginners and above all, certified as safe to use.
It is ASTM certified - non toxic, zero bubbles and also the most versatile resin for all your coating or casting needs. It is also odorless and BPA free and is preferred by thousands of artists.
The bubble release mechanism is by far, the best available in the market. It is also optically clear and formulated with UV stabilizers and HALS. It can also be used as a food safe coating once fully cured.
Recommended for
- Coating & art pouring
- Shallow casting (less than 20mm) of small objects in single pour (One can pour multiple layers of 20 mm to get the desired depth). For casting needs greater than 20 mm in single pour, we suggest Thick Cast.
HOW TO USE -
MEASURE
|
MIX |
POUR
|
WAIT
|
|
Part A : Part B
2:1
by weight
|
Mix it well for 3-4 minutes scraping the sides and bottom well |
Working time 70-80 min. Pour as you like it |
Wait for ~24 hours for the artwork to cure before demolding, touching. |
TECHNICAL DETAILS (all properties are tested at room temperature 30-32 degrees C) -
| POT LIFE | 70-80 MINUTES |
| TOUCH DRY | 6-8 HOURS |
| OVERCOAT TIME | 8-10 HOURS |
| CURE TO HANDLE | 24 HOURS |
| FULL INTERNAL CURE | 3 DAYS |
| MAXIMUM THICKNESS IN ONE POUR | 0.5 INCH |
| COVERAGE | 10-12 SQ. FT. OF 1 MM THICKNESS |
2:1 Art Resin is a high performing epoxy resin system with supreme gloss, good pot life to make it easy for beginners and above all, certified as safe to use.
It is ASTM certified - non toxic, zero bubbles and also the most versatile resin for all your coating or casting needs. It is also odorless and BPA free and is preferred by thousands of artists.
The bubble release mechanism is by far, the best available in the market. It is also optically clear and formulated with UV stabilizers and HALS. It can also be used as a food safe coating once fully cured.
Recommended for
- Coating & art pouring
- Shallow casting (less than 20mm) of small objects in single pour (One can pour multiple layers of 20 mm to get the desired depth). For casting needs greater than 20 mm in single pour, we suggest Thick Cast.
HOW TO USE -
MEASURE
|
MIX |
POUR
|
WAIT
|
| Part A : Part B 2:1 by weight | Mix it well for 3-4 minutes scraping the sides and bottom well |
Working time 70-80 min. Pour as you like it |
Wait for ~24 hours for the artwork to cure before demolding, touching. |
TECHNICAL DETAILS (all properties are tested at room temperature 30-32 degrees C) -
| POT LIFE | 70-80 MINUTES |
| TOUCH DRY | 6-8 HOURS |
| OVERCOAT TIME | 8-10 HOURS |
| CURE TO HANDLE | 24 HOURS |
| FULL INTERNAL CURE | 3 DAYS |
| MAXIMUM THICKNESS IN ONE POUR | 0.5 INCH |
| COVERAGE | 10-12 SQ. FT. OF 1 MM THICKNESS |
Related Products
