3:1 Art Resin Kit - 400gm

Seller: KundanTraders

Add Your Review

Rs. 730.00

Out Stock

Wishlist

Product

3:1 Art Resin Kit - 400gm

Seller

KundanTraders

Art Resin 3:1 is our small pack. Ideal for beginners looking to try resin art with small artworks such as coasters, keychains, bookmarks etc.

It is ASTM certified - non toxic (If you are a beginner, remember to check this certification as safety must be top priority)
It has zero bubbles and also the most versatile resin for all your coating or casting needs.
It is also odorless and BPA free and is preferred by thousands of artists.
The bubble release mechanism is by far, the best available in the market.
It is also optically clear and formulated with UV stabilizers and HALS.
It can also be used as a food safe coating once fully cured.

Recommended for

HOW TO USE -

MEASURE	MIX	POUR	WAIT
Part A : Part B 3:1 by weight	Mix it well for 3-4 minutes scraping the sides and bottom well	Working time 70-80 min. Pour as you like it	Wait for ~24 hours for the artwork to cure before demolding, touching.

TECHNICAL DETAILS (all properties are tested at room temperature 30-32 degrees C) -

POT LIFE	70-80 MINUTES
TOUCH DRY	6-8 HOURS
OVERCOAT TIME	8-10 HOURS
CURE TO HANDLE	24 HOURS
FULL INTERNAL CURE	3 DAYS
MAXIMUM THICKNESS IN ONE POUR	0.5 INCH
COVERAGE	10-12 SQ. FT. OF 1 MM THICKNESS

Art Resin 3:1 is our small pack. Ideal for beginners looking to try resin art with small artworks such as coasters, keychains, bookmarks etc.

It is ASTM certified - non toxic (If you are a beginner, remember to check this certification as safety must be top priority)
It has zero bubbles and also the most versatile resin for all your coating or casting needs.
It is also odorless and BPA free and is preferred by thousands of artists.
The bubble release mechanism is by far, the best available in the market.
It is also optically clear and formulated with UV stabilizers and HALS.
It can also be used as a food safe coating once fully cured.

Recommended for

HOW TO USE -

MEASURE	MIX	POUR	WAIT
Part A : Part B 3:1 by weight	Mix it well for 3-4 minutes scraping the sides and bottom well	Working time 70-80 min. Pour as you like it	Wait for ~24 hours for the artwork to cure before demolding, touching.

TECHNICAL DETAILS (all properties are tested at room temperature 30-32 degrees C) -

POT LIFE	70-80 MINUTES
TOUCH DRY	6-8 HOURS
OVERCOAT TIME	8-10 HOURS
CURE TO HANDLE	24 HOURS
FULL INTERNAL CURE	3 DAYS
MAXIMUM THICKNESS IN ONE POUR	0.5 INCH
COVERAGE	10-12 SQ. FT. OF 1 MM THICKNESS

Sample Product